ER - Epoxi Resins

Alle anzeigen / Alle verbergen

Epoxylite® H 1100 #

Single component epoxy resin system having a low penetration viscosity that cures to become a tough resilient product having excellent moisture and chemical resistance. Suitable for dip or roll dip impregnation of low voltage electric stator and rotor.  The product fulfils the directives 2011/65/EU, 2003/11/EC, 2006/121/EC .

Epoxylite® 825240 M

Single component epoxy resin,   low penetration viscosity very short cycle , that cures to become a tough resilient product having excellent moisture and chemical resistance. Suitable for dip or roll dip impregnation of low voltage electric stator and rotor.  The product fulfils the directives 2011/65/EU, 2003/11/EC, 2006/121/EC .

Epoxylite® 3600 UV

Epoxy-Gel-Coat  UV / oven curing.  
High permanent temperature resistance  gel coat, oven-curing epoxy system, hard moulds, with accelerated surface hardening through UV-radiations, for thermal class 180 (H) .  The product  fulfils the directives 2011/65/EU, 2003/11/EC, 2006/121/EC .

Epoxylite® NV 006-3752 F 20

Single component , epoxy resin, low volatile, excellent moisture and chemical resistance. Suitable for dip or roll dip impregnation of low voltage electric stator and rotor.  The product fulfils the directives 2011/65/EU, 2003/11/EC, 2006/121/EC .

Alle anzeigen / Alle verbergen

EPOXYLITE® 4526

Single component wound core VPI epoxy resin, low stress heat curing, epoxy resin and suitable for continuos use in thermal class 180 ( H ). Epoxy resin of this type are 100% solids systems resulting in low emission on cure.

EPOXYLITE® H 1009#

Single component  VPI epoxy resin, suitable for continuous use in thermal class 180 ( H ) . The product has a very low viscosity profile which allows for good penetration at ambient temperatures  Epoxy resin of this type are 100% solids systems resulting in low emission on cure.

EPOXYLITE® H 1100 #

Single component, epoxy dip impregnating resin suitable for use at Class 180 (H). Dip Impregnation of motors, coils and transformers.
It is low in processing viscosity to ensure optimum penetration of windings, but also provides an additional tough, protective film coating after cure.

EPOXYLITE® 578 EB #

Single component, translucent, 100% solids Epoxy resin for VPI treatment of rotating electrical machines which operates at Class 180 ( H ). It can be supplied with differing viscosities to suit customers specific applications.
VPI treatment of low voltage stators, armatures and field coils and all rotating electrical machines up to 13.8 kV. Specifically engineered resin / insulation systems are required for 6.6 kV machines and above.

EPOXYLITE® TSA 220 #

Single component,  100% solids  content. Epoxy resin for VPI treatment of rotating or static electrical machines Epoxy resin for VPI treatment. Product provides for a cured insulation system which conforms to thermal class 220° C. High performance VPI resin for treatment of traction motors and field coils.

EPOXYLITE® 006-0841

it is a solventless epoxy system, low viscosity, Class 180 (H), single component, with excellent long term, good tank stability.
It has excellent dielectric strength, water / chemical resistance and good loss tangent characteristics at temperature, these features combine to make it suitable for use in machines operating in the most demanding of environments. Suitable for Global Vacuum Pressure Impregnation (VPI) of form wound electrical machines up to and including 13.8kV, as well as armatures and other wound rotating components.